PoolCalc.

Pool gallon chart

Updated 20 November 2026

The common pool sizes, the gallons each one holds at a stated average depth, and the one-line adjustment when your pool is deeper or shallower than the table assumes.

Rectangular pools

Size (ft)Surface (sq ft)Average depthGallons
12 × 242884.0 ft8,617
15 × 304504.5 ft15,147
16 × 325124.75 ft18,193
18 × 366485.0 ft24,235
20 × 408005.0 ft29,920
25 × 501,2505.0 ft46,750
30 × 601,8005.0 ft67,320

Round pools

DiameterSurface (sq ft)Average depthGallons
12 ft1133.5 ft2,961
15 ft1774.0 ft5,287
18 ft2544.0 ft7,614
21 ft3464.0 ft10,363
24 ft4524.0 ft13,536
27 ft5734.0 ft17,131
30 ft7074.0 ft21,149

Oval pools

Size (ft)Surface (sq ft)Average depthGallons
12 × 242264.0 ft6,768
15 × 303534.5 ft11,896
18 × 334664.5 ft15,703
21 × 416764.5 ft22,766

How to use a chart like this

Every number above is surface area times average depth times 7.48. The surface area is geometry; the average depth is the assumption. If your pool is 4 ft at the shallow end and 8 ft at the deep end, the average is 6 ft, not the 4.5 or 5 ft the table guessed. That single foot is worth 10% to 30% of the volume.

So use the chart in two steps. First find the row that matches your pool's footprint. Then correct the gallons for your own depth: gallons per foot of depth is the surface area times 7.48, so the difference between the table's depth and yours is a simple multiplication.

your gallons = table gallons × (your average depth ÷ table average depth)

Example: a 16 × 32 pool that runs 3 ft to 5 ft has a 4 ft average, not 4.75. 18,193 × (4 ÷ 4.75) = 15,320 gallons. That is a 2,900 gallon difference — enough to change a salt dose by two bags.

Gallons per inch of depth

For small adjustments, one inch is easier than a fraction of a foot. One inch over a surface area A is A × 7.48 ÷ 12 gallons. A few useful values:

Surface areaGallons per inchExample
200 sq ft125Small round or oval
400 sq ft24915 × 27 rectangle
512 sq ft31916 × 32 rectangle
800 sq ft49920 × 40 rectangle
1,250 sq ft77925 × 50 rectangle

This is the number to use when you are deciding whether to drain six inches or a foot, or when you are topping up after a backwash and want to know how much salt you just diluted.

Why the exact number matters for chemicals

A chlorine dose is forgiving: if the volume is 10% off, the free chlorine lands 10% off, and the next test corrects it. Salt and stabilizer are not forgiving, because they do not leave the pool except by dilution. Adding salt for 20,000 gallons to an 18,000 gallon pool puts you 11% above target, and the only fix is draining water.

The same logic applies to a partial drain: the fraction you remove is the fraction of CYA or salt you remove, so the volume has to be right before you start. The volume calculator works out any shape, and the salt and CYA pages turn the volume into a dose.

What the chart does not cover

  • Kidney and freeform pools. There is no agreed formula; the volume calculator uses a 0.45 multiplier and says so.
  • Sport pools and lap pools. A 10 × 40 lap pool is 400 sq ft, but its depth is often constant at 4 ft, so it holds less than a same-footprint play pool.
  • Infinity edges and catch basins. The basin holds water you are also treating, and it is not in any chart.
  • Above-ground pools. The wall height is not the water depth; subtract 6 to 10 inches for the skimmer and the coping.

Frequently asked

How many gallons is a 24 foot round pool?

About 13,500 gallons at an average depth of 4 ft. That is π × 12² × 4 × 7.48. A 24 ft round with a 4.5 ft average holds about 15,200 gallons.

How many gallons is an 18 × 36 pool?

About 24,200 gallons at an average depth of 5 ft. At 4.5 ft it is about 21,800; at 5.5 ft it is about 26,700.

How many gallons is a 15 × 30 pool?

About 15,100 gallons at an average depth of 4.5 ft. That is 450 sq ft × 4.5 ft × 7.48 gallons per cubic foot.

Why do charts disagree by a few hundred gallons?

Different assumed depths, different rounding, and whether the chart measures the waterline or the outside of the wall. A few hundred gallons is normal; a few thousand means a different depth assumption.

How much does one inch of depth add?

One inch over 400 sq ft is about 249 gallons: 400 × 7.48 ÷ 12. Over 800 sq ft it is about 499 gallons. That is why the depth you assume matters more than the length.

Where these numbers come from

Figures that come from our own arithmetic rather than a published guide are marked house rule on the method page. No price is shown anywhere on this site.

Related: pool volume calculator · salt · CYA · pump runtime guide